Glad that your first issue was solved and sorry about not getting back to
your question from the user list. Actually for particular feature requests
the help list I think would be the best. also you can try emailing the
developers list at developers@...642...
There is currently a long list of tasks from major bug fixes, to major
revisions and including feature requests which can be viewed at
trac.sasview.org under tickets. A direct link to one common way to look at
those would be http://trac.sasview.org/report/3
Please feel free to suggest things that you think would be the highest
impact for your work
Regarding "soft constraints" could you elaborate what you mean? Currently
fairly complex equality constraints are supported though there are
questions about how well those work when polydispersity is used.
Inequality constraints are not supported though there is interest in seeing
that. Doing inequality constraints correctly is much harder which is the
current bottleneck.
CHeers
Paul
On Sat, Sep 2, 2017 at 1:06 PM, Marcelo Ceolin <mrceolin@...6...> wrote:
> Dear Paul.
> Thank you very much for your care and answer.
> It is true the difference between 4.x and 3.x about the default fitting
> status of the parameters. In fact it is clear from the tutorial, that only
> ready to fit parameters can be constrained.
> For me is enough...I should only pay more attention !!!!.
> I also sent to the user forum a comment/question about the way to suggest
> the developers the incorporation of other features to the program.
> In fact, the point is the possibility to introduce soft boundaries and
> soft constrains for the parameters and more complex constrains and
> relationships between them.
> If you think there is a possibility to discuss the point, I will be glad
> to give more details.
> Thank you in advance.
> Marcelo
>
> El 2 sept. 2017 1:53 PM, "Paul Butler" <butlerpd@...4...> escribió:
>
>> Hi Marcelo,
>>
>> Sorry for the delayed response and thank you for your feedback.
>> Addressing your two issues
>>
>> 1) After investigating this is not so much a bug it turns out as failure
>> to make usage clear so thank you for bringing to our attention. Basically
>> the drop-down will only show parameters of the model that were selected to
>> fit (i.e. checked in the appropriate fitting panel). I have tested 4.1.2
>> on windows 10 and it does seem to work properly. However the default when
>> loading a model is for all parameters to be unchecked so unless you
>> deliberately check at least one parameter (in model 1 in your case) you
>> will see nothing in the drop-down (of M1 in your case). If you go back and
>> check at least one parameter for fitting (probably FitPage 1 in your case?)
>> you should then see that parameter in the dropdown.
>>
>> I'm thinking a statement in the fit constraints section indicating this
>> to be the case would be appropriate?
>>
>> 2) This is a "known behavior" that some (many?) of us had forgotten so
>> thank you for reminding us. I will make sure it is made a high priority
>> ticket. However, this is only true for the LM optimizer. if you chose any
>> of the other four optimizers for the fitting, those limits should be
>> respected. Please let us know if that is not the case.
>>
>> Thanks again for the feedback and hope this helps a little
>>
>> Cheers
>>
>> Paul
>>
>> On Thu, Aug 31, 2017 at 1:48 PM, Marcelo Ceolin <mrceolin@...6...>
>> wrote:
>>
>>> Dear Developers of SASVIEW
>>>
>>> I would like to report two bugs I found using the WINDOWS 4.1.2 release
>>> of SASVIEW
>>> 1) during the setup of SIMULTANEOUS fit and after selecting files to be
>>> fitted and activated the ADD CONSTRINS mode, there is no PARAMETER to
>>> select in the pull-down menu right from the parameter (please, find
>>> attached a screen capture)
>>>
>>> [image: Imágenes integradas 1]
>>>
>>> 2) during a normal SINGLE FILE fit using the GUINIER POROD model (I
>>> guess it has nothing to do with the model), the fiting procedure do not
>>> take care of the limits imposed to the parameters.
>>>
>>> Thank you very much for your support.
>>>
>>> Sincerely yours.
>>>
>>> MARCELO CEOLIN
>>>
>>> --
>>> ***********************************************************************
>>> Prof. Dr. Marcelo Ceolin
>>> Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas
>>> UNLP-CONICET
>>> Diagonal 113 y 64
>>> Casilla de Correo 16 (sucursal 4)
>>> (B1906ZAA) La Plata
>>> Argentina
>>>
>>> Tel: +54-221-4257291 <+54%20221%20425-7291> or 4257430 (int:173 or 162)
>>> Fax: +54-221-4254642 <+54%20221%20425-4642>
>>> e-mail: mceolin@...639... (work) or mrceolin@...6...
>>> (private)
>>> WEB: softmatter.quimica.unlp.edu.ar
>>> <https://softmatter.quimica.unlp.edu.ar/?page_id=5823> (main) or
>>> www.inifta.unlp.edu.ar
>>> <http://www.inifta.unlp.edu.ar/quimica_de_la_materia_blanda>
>>> ORCID ID: ORCID ID 0000-0002-2385-7803
>>> <https://orcid.org/0000-0002-2385-7803>
>>> Google Scholar: Google Scholar
>>> <https://scholar.google.com.ar/citations?user=7LTN_j4AAAAJ&hl=es>
>>> ***********************************************************************
>>>
>>>
>>>
>>> ------------------------------------------------------------
>>> ------------------
>>> Check out the vibrant tech community on one of the world's most
>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>> _______________________________________________
>>> Sasview-help mailing list
>>> Sasview-help(a)lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/sasview-help
>>>
>>>
>>
Dear Developers of SASVIEW
First of all I would like to acknowledge the quality and usefulness of the
numerous SASVIEW versions.
My question now is if it is possible to suggest new features and
improvements (from a plain user point of view) for the next versions of the
program using this or any other channel.
Thank you very much in advance for your answer.
MARCELO CEOLIN
--
***********************************************************************
Prof. Dr. Marcelo Ceolin
Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas
UNLP-CONICET
Diagonal 113 y 64
Casilla de Correo 16 (sucursal 4)
(B1906ZAA) La Plata
Argentina
Tel: +54-221-4257291 or 4257430 (int:173 or 162)
Fax: +54-221-4254642
e-mail: mceolin@...639... (work) or mrceolin@...6... (private)
WEB: softmatter.quimica.unlp.edu.ar
<https://softmatter.quimica.unlp.edu.ar/?page_id=5823> (main) or
www.inifta.unlp.edu.ar
<http://www.inifta.unlp.edu.ar/quimica_de_la_materia_blanda>
ORCID ID: ORCID ID 0000-0002-2385-7803
<https://orcid.org/0000-0002-2385-7803>
Google Scholar: Google Scholar
<https://scholar.google.com.ar/citations?user=7LTN_j4AAAAJ&hl=es>
***********************************************************************
