[SasView Users] [SasView Help] Error Message when loading 2D data

Wed Jun 12 19:26:28 EDT 2019

Dear Paul,

Thanks a lot for the information. Yes, you are right. I am able to use Fit2D to export  BSL/OTOKO 2D and that file can be directly import into SASView. I will also ask Bruker people whether there is a way for us to output our 2D pattern in the NeXUS NXcanSAS format.

Just another question, after I input the 2D pattern, I would like to do a sector average. Is there any way that we can define the beam center manually? The beam center is off as shown in the attached file. Thanks again!!

Best regards,
Kuo-Chih

[cid:df20f762-0d5b-4d35-8b39-760edabc46cc]

From: Paul Butler<mailto:butlerpd at udel.edu>
Sent: Wednesday, June 12, 2019 6:46 PM
To: Shih, Kuo-Chih<mailto:kuo-chih.shih at uconn.edu>
Cc: users at sasview.org<mailto:users at sasview.org>; help at sasview.org<mailto:help at sasview.org>; Nieh, Mu-Ping<mailto:mu-ping.nieh at uconn.edu>
Subject: Re: [SasView Help] Error Message when loading 2D data

Hi Kuo-Chih,

2D data formats are very specific (unlike 1D which most people default to the same general format).  now that the NeXUS NXcanSAS standard reduced data format has been approved, we are trying to encourage its use to avoid exactly this kind of problem.  Bruker poeple have attended some of the canSAS meetings where the standard work was discussed and now that it has been approved I encourage you to ask them to output their data in said format.

In the meantime, for legacy reasons only, SasView also supports the NIST 2D ASCII format.  Further, as you discovered, SasView has a converter which will convert ISIS 2D ASCII format as well as the BSL/OTOKO 2D format. Question: What type of ASCII format are you getting from Fit2D? My guess is that the error is because the format is not a supported input format to the converter? I am assuming this error is being thrown when you try to convert the data? I am well aware of Fit2D but have never used it so not sure what 2D output formats it supports, but looking online I'm not sure that its two ASCII 2D outputs (Spread sheet and MCA) are compatible?  It seems like Fit2D will output a BSL 2D? which the SasView converter should be able to handle.  It also seems to output a TIFF. If all else fails you can try that and use the image converter to see if it works?

There maybe others who know more about the Fit2D output who might have some suggestions.  Otherwise please let us know how you get on and if I have misunderstood the problem please don't hesitate to ask again.

Cheers

Paul

.

On Wed, Jun 12, 2019 at 4:24 PM Shih, Kuo-Chih via help <help at lists.sasview.org<mailto:help at lists.sasview.org>> wrote:

Dear SASView Help Team,

I am Kuo-Chih Shih from the University of Connecticut. Dr. Mu-Ping Nieh and I are now trying to fit the 2D scattering pattern we got from the Bruker nanostar machine. Since SASView is not able to read the raw data (.gfrm) from Bruker machine, I used Fit2D to convert it to a ASCII data. However, when I try to load the file, SASView shows me the following message. I also try to convert the ASCII file to the NXcanSAS file but it gave me another error message. I also attached the SasView log file. Could you please help me to troubleshoot this?

[cid:16b4dbb1d9ff456b1e51]

[cid:16b4dbb1d9ff456b1e52]

_______________________________________________
help mailing list
help at lists.sasview.org<mailto:help at lists.sasview.org>
http://lists.sasview.org/cgi-bin/mailman/listinfo/help<https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.sasview.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Fhelp&data=02%7C01%7Ckuo-chih.shih%40uconn.edu%7C3bf6764bb8de45cafed008d6ef87bee1%7C17f1a87e2a254eaab9df9d439034b080%7C0%7C0%7C636959763644301236&sdata=x59yWMaVG%2BVE1OM1fJxXSsKMDUG%2FVYXwbD94%2FQeFFx4%3D&reserved=0>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sasview.org/cgi-bin/mailman/private/users/attachments/20190612/4cff5aaf/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pastedImage.png
Type: image/png
Size: 15866 bytes
Desc: pastedImage.png
URL: <http://lists.sasview.org/cgi-bin/mailman/private/users/attachments/20190612/4cff5aaf/attachment-0003.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pastedImage.png
Type: image/png
Size: 9986 bytes
Desc: pastedImage.png
URL: <http://lists.sasview.org/cgi-bin/mailman/private/users/attachments/20190612/4cff5aaf/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pastedImage.png
Type: image/png
Size: 138111 bytes
Desc: pastedImage.png
URL: <http://lists.sasview.org/cgi-bin/mailman/private/users/attachments/20190612/4cff5aaf/attachment-0005.png>