From B.Tian-1 at tudelft.nl Thu Jan 24 10:30:24 2019 From: B.Tian-1 at tudelft.nl (Bei Tian - TNW) Date: Thu, 24 Jan 2019 15:30:24 +0000 Subject: [SasView Users] Fitting 1D sector cut data Message-ID: <720d11fe2ef84d7e8f25b86e3e40c87c@tudelft.nl> Dear members of the SASView team, I’m Bei, a user of SASView. I have some anisotropic scattering data from ANSTO, which I would like to fit using SASView. Please find an example in th e attachment. As you can see, I have the reduced and stitched 1D sector cut scattering data, and the separate, raw 2D detector signals that covers diff erent Q-range. We have in mind to fit the data with an ellipsoid or cylindrical shape, but do you have any suggestions on HOW? As far as I know, SASView (version 4.2.0) can’t fit 1D data from sector c ut, is that correct? Thank you for your help. B. (Bei) Tian PhD Candidate TUDelft Section Neutron and Positron Methods for Materials Department Radiation Science and Technology Faculty of Applied Sciences Gebouw 50 Mekelweg 15 2629 JB Delft M: +31 6 17 02 83 72 E: b.tian-1 at tudelft.nl T: +31 15 27 84702 -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 2D&1D_plot.pdf Type: application/pdf Size: 165287 bytes Desc: not available URL: -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: ATT00001.txt URL: